Trap Switch - Pioneer PDP-5050SX Service Manual

5

6.4 TRAP SWITCH

Outline and Notes
For video data transmission, digital signals are used. Therefore, this unit adopts the HDCP (High-bandwidth Digital Content
Protection) system for copyright protection. This unit is also provided with a detection switch (TRAP switch) that will prohibit
the unit from being turned on again "if the upper plate of the unit is accidentally opened," in order to prevent the panel
technology from being leaked out.
The TRAP switch is disabled while the unit is turned off.
When performing internal diagnosis of the PDP, fix the switch to the OFF position using adhesive tape before turning on the
unit. After servicing, be sure to remove the adhesive tape.
5
6
PDP-5050SX
6
7
TRAP switch
7
8
A
B
C
D
E
F
99
8