E Ent Scheduling - Hitachi CP-EX3051WN User Manual-Network Manual

8.3 Event Scheduling
The scheduling function enables to setup scheduled e ents including power on /
power off. It enables to be "self-management" projector.
Note the following before setting the schedule.
NOTE
Schedule can also be set in OPTION - SCHEDU E menu of the
projector. Refer to Operating
A maximum of 16 programs of schedule can be set. A maximum of 20 e ents
can be registered in 1 program.
No e ents are registered in program 1 – 16 with factory default settings. The
program is re uired to be set in ad ance when using the schedule function for
the rst time.
The priority for scheduled e ents is as follows 1) speci c date 2) weekly
Up to 10 speci c dates are a ailable for scheduled e ents. Priority is gi en to
those with the lower numbers when more than one e ent has been scheduled
for the same date and time e.g., Speci c date No. 1' has priority o er Speci c
date No. 2' and so on.
The power on e ent has the lowest priority among all the e ents set at the
same time.
e sure to set the date and time before enabling scheduled e ents.
After the projector is mo ed, check the date and time set for the projector
before con guring the schedules.
The internal clock's time may not remain accurate. Using SNTP is recommended
to maintain accurate time.
Certain error state in the projector such as temperature error, lamp error) will
pre ent the projector from appropriate execution of scheduled functions/e ents.
E ents "My Image" and "Messenger" will not be executed appropriately and
result in "schedule execution error" status when the lamp does not light and/or
data to be displayed are not stored in the projector at the time when scheduled
e ent is executed.
E ents "Input Source" and "My Image" is not executed if security function is
enabled and the projector is locked due to the function.
If no US memory de ice is inserted to the projector or no image data for
display exists at the scheduled e ent time, a schedule execution error occurs
against the scheduled Slide show e ent.
When you start the Slide show, input source will be automatically switched to
the USB TYPE A port.
Image les stored in the root directory of the US memory de ice will be
displayed for the scheduled Slide show.
uide – OPTION).
8. Other Functions
56)
93