Hitachi CP-EX3051WN User Manual-Network Manual page 92

8. Other Functions
Setup the following functions through WE browser, if you want to manage the
projector by SNMP.
Port Settings
1) Select [Port Settings] on main menu in Projector Web Control.
2) Click the [Download MIB File] to download a MI
3) Click the [Enable] check box to open the SNMP Port. Set the address to send
the SNMP trap to when a Failure/Warning occurs.
Security Settings
1) Select [Security Settings] on main menu in Projector Web Control.
2) Click the [SNMP] and set the community name on the displayed screen.
Alert Settings
Con gure the settings for Trap transmission of Failures/Warnings.
1) Select [Alert Settings] on main menu in Projector Web Control.
2) Select the Failure/Warning item to be con gured.
3) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.
Clear the [Enable] check box when SNMP trap transmission is not re uired.
4) Click the [Apply] button to sa e the settings.
NOTE
Register the downloaded MI
e sure to execute Network Restart when the settings of [Port Settings] or
[Security Settings] is changed.
92
48)
58)
51)
le.
le to SNMP manager program to be used.