Connection Ia Wired An - Hitachi CP-EX3051WN User Manual-Network Manual

2. Connection to the network
2.2
Connection via wired LAN
The connection ia wired AN is a ailable. Set wired AN for the projector by
following the instructions of your network administrator when connecting to the
existing network.
Connection setup of wired LAN
1) Connect the projector to the computer ia a hub
with a AN cable CAT-5e or higher).
2) Press the MENU button on the remote control or
the control panel of the projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > AD ANCED MENU > NETWORK
> NETWORK SETUP > WIRED SETUP
3) Set the following items in WIRED SETUP.
DHCP
IP ADDRESS
SU NET MASK
DEFAU T ATEWAY
DNS SER ER
As for setting an IP address, refer to About IP address.
Select APP Y, then press the ENTER button to re ect the settings.
18
hub
19)