Hitachi CP-EX3051WN User Manual-Network Manual page 111

Phenomenon: The time settings are not correct.
Item to be checked
Is the date and time set correctly Check the settings of Date/Time Settings menu
Is the projector connected to the
network correctly when getting
the time ia the network
Is SNTP ser er set correctly
when getting the time ia the
network
Is the time difference set correctly
when getting the time ia the
network
Phenomenon: Cannot control the external de ice by using Network ridge.
Item to be checked
Is Network ridge settings
enabled
Is STAND Y MODE set to
NETWORK WO ) or SA IN
Are the serial settings set
correctly
Solutions
of the Projector Web Control or DATE AND
TIME menu of the projector.
Connect to the network.
Check the settings of SNTP ser er.
Consult with your network administrator
regarding the settings of SNTP ser er.
When getting the time ia the network,
the correct time is not displayed if the time
difference is not set.
Set the time difference.
Solutions
Check the settings in OPTION - SER ICE -
COMMUNICATION - COMMUNICATION TYPE
menu.
The Network ridge is not a ailable when
STAND Y MODE is set to NETWORK WO )
or SA IN . Set STAND Y MODE to NORMA ,
and set NETWORK RID E WIRE ESS/
WIRED) in the COMMUNICATION TYPE
menu.
Check the serial settings of the projector and
the external de ice.
9. Troubleshooting
111