Fu -Dup E - Hitachi CP-EX3051WN User Manual-Network Manual

7.4 Transmission method (continued)
NOTE
With using the HA F-DUP E method, the projector can send out
254 byte data at the maximum at a time.
If it is not re uired to monitor the response data from an external de ice and
the RESPONSE IMIT TIME is set to OFF, the projector can recei e the data
from the computer and send it out to an external de ice continuously.
The OFF is selected as the default setting.
7.4.2 FULL-DUPLEX
This method lets the projector make two way communication, transmitting and
recei ing data at the same time, without monitoring response data from an
external de ice.
With using this method, the computer and an external de ice will send the data
out of synchroni ation. If it is re uired to synchroni e them, set the computer to
make the synchroni ation.
NOTE
When the computer controls the synchroni ation of receptions and transmissions,
the external de ice may not be controlled properly depending on the status of data
processing of the projector.
7. Network Bridge Function
87