Network Menu - Hitachi CP-EX3051WN User Manual-Network Manual

2.4 NETWORK Menu

Remember that incorrect network settings on this
projector may cause trouble on the network. e sure
to consult with your network administrator before
connecting to an existing access point on your
network.
Select "NETWORK" from the main menu to access
to the following functions.
NOTE
The projector does not allow both wireless and wired AN to be
connected to the same network.
If you do not use SNTP, then you must set the DATE AND TIME during the
initial installation.
The network function is not a ailable when STAND Y MODE is set to
NETWORK WO ) or SA IN
the projector to the network after setting STAND Y MODE to NORMA .
SETUP menu in the Operating
When using wireless network function, set NETWORK - WIRE ESS
NETWORK to ON.
OPTION menu in the Operating
and the projector is in standby mode. Connect
uide)
2. Connection to the network
uide)
21