Connection To The Network - Hitachi CP-EX3051WN User Manual-Network Manual

2. Connection to the network

2. Connection to the network
The connection method of wireless AN and wired AN is as follows.
Wireless AN US -W -5 )
Item
Standard
Channel
*1
Encryption
*2
andwidth
*1: A ailable channels may ary according to area.
*2: WEP is only for INFRASTRUCTURE mode.
Wired AN
Item
Standard
Port
NOTE
The network function is not a ailable when STAND Y MODE is set
to NETWORK WO ) or SA IN
the projector to the network after setting STAND Y MODE to NORMA .
SETUP menu in the Operating
Depending on the type of wireless network de ice and computer you are
using, the projector may not be able to communicate properly with your
computer, e en if the computer is e uipped with a built-in wireless AN
function. To eliminate communication problems, use a Wi-Fi
network de ice.
Connect the optional wireless adapter US -W -5 ) to the USB TYPE A port
of the projector when using the wireless AN.
12
IEEE802.11a/b/g/n/ac
2.4 H : 1 11ch
5 H : 36/40/44/48ch W52)
149/153/157/161/165ch W58)
WPA2-PSK AES/TKIP), WPA-PSK AES/TKIP),
WEP 64/128bit)
2.4 H : 20/40MH
5 H : 20/40/80MH
100 ASE-T / 10 ASE-T
RJ-45
and the projector is in standby mode. Connect
uide)
Description
Description
®
14 in the Operating
certi ed wireless
uide)