Hitachi CP-EX3051WN User Manual-Network Manual page 14

2. Connection to the network
NOTE
If using a wireless network function, please make sure that NETWORK -
WIRE ESS NETWORK setting is ON.
Network settings can also be changed in Network Settings of Projector Web
Control
Wireless AN initial settings for the projector are as follows.
Mode: Simple Access Point
IP address: 192.168.10.1
Subnet Mask: 255.255.255.0
SSID: SimpleAccessPoint
SSID roadcast: ON
Encryption: OFF
Wireless Fre .: 2.4
Channel: 11
The same network address cannot be used for both wireless AN and wired
AN.
Communication speed of the projector may be deteriorated in Simple Access
Point mode depending on the number of connected de ices.
14
H