Hitachi CP-EX3051WN User Manual-Network Manual page 45

3.1 Projector Web Control - Network Settings (continued)
2. Infrastructure settings
Item
SSID *1
Encryption
WEP Key
WPA Passphrase *2
*1 The text length can be up to 32 alphanumeric characters and symbols. Only
symbols "
*2 The text length can be 8 to 63 alphanumeric characters and symbols. Only
symbols "
NOTE
If Encryption ock is ON, wireless connection is performed only when
it can be connected without changing the current settings.
The channels may ary depending on the country. In addition, depending on
the country or region, it may be re uired to use a wireless network card that
conforms to the standards in the respecti e country or region.
If you connect the projector to an existing network, consult a network
administrator before setting ser er addresses.
The projector does not allow both wireless and wired AN to be connected to
the same network. Do not set the same network address for both wireless and
wired AN.
Con gures the network settings of the projector in
Infrastructure mode.
[DHCP ON]
Enables DHCP.
[DHCP OFF]
Disables DHCP.
Con gures IP Address, Subnet Mask, Default ateway
and DNS ser er.
Con gures the SSID of Infrastructure mode.
Selects data encryption method.
Inputs the WEP key.
Either ASCII characters or hexadecimal numbers can
be used.
Howe er, a combination of both cannot be used.
Encryption
WEP 64bit
WEP 128bit
Inputs WPA Passphrase.
)* ,-./: < > [ ]
)* ,-./: < > [ ]
Description
ASCII characters
5 characters
13 characters
and space" can be used.
and space" can be used.
3. Web Control
HE numbers
10 characters
26 characters
45