Advertisement
Table of Contents
- 1 Table of Contents
- 2 Indication to the Manual
- 3 Description of Product
- 4 Safety Instructions
- 5 Transport and Storage
- 6 Installation and Connection
- 7 Start up / Shut down
- 8 Operation
- 9 Servicing and Maintenance
- 10 Trouble Shooter's Guide
- 11 Spare Part
- 12 Repair
- 13 Disposal
- 14 EC Declaration of Conformity
- Download this manual
BE2810
BRINKMANN Immersion Pumps
Brinkmann Pumpen
K. H. Brinkmann GmbH & Co. KG
Friedrichstraße 2
D-58791 Werdohl
Tel.: +49-2392 / 5006-0
Fax.: +49-2392 / 5006-180
Subject to change without prior notice.
© Brinkmann Pumpen
Operating Instructions
(Translation of original)
11/2019
Edition
SGL801...1103
www.brinkmannpumps.de
sales@brinkmannpumps.de
Order - No. : BE2810 ENGLISH
1
10
Page
of
Advertisement
Table of Contents
Related Manuals for BRINKMANN PUMPS SGL Series
Summary of Contents for BRINKMANN PUMPS SGL Series
- Page 1 BE2810 Operating Instructions (Translation of original) BRINKMANN Immersion Pumps SGL801…1103 Brinkmann Pumpen K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2 D-58791 Werdohl Tel.: +49-2392 / 5006-0 www.brinkmannpumps.de Fax.: +49-2392 / 5006-180 sales@brinkmannpumps.de Subject to change without prior notice. Order - No. : BE2810 ENGLISH ©...
-
Page 2: Table Of Contents
Brinkmann Immersions pumps of the series SGL801 ... 1103 Contents 9 Trouble shooter’s guide ........7 Indication to the manual ........2 Description of product ........2-3 10 Spare part ............8-9 Safety instructions ..........4 11 Repair ............... 9 Transport and storage ........ - Page 3 Technical data Max. del. Max. del. Height Depth of Weight Power pressure bar / volume immersion 60 Hz Type spec. weight 1 l/min H mm h mm SGL801 / 220 2.94 / 320 / 450 / 570 / 770 /1000 1000 SGL802 / 290...
-
Page 4: Safety Instructions
Safety instructions relevant for operation 3 Safety instructions • If hot or cold machine components involve haz- When operating the pump, the safety instructions contained in this manual, the relevant national acci- ards, they must be guarded against accidental dent prevention regulations and any other service contact. -
Page 5: Installation And Connection
Electric wiring 5 Installation and Connection Mechanical installation During any assembly or disassembly process the pumps must be secured against tipping trough ropes for example at all times. All service work must be carried out by qualified Pumps must be mounted securely. Piping, tank and service personnel. -
Page 6: Start Up / Shut Down
6 Start up / Shut down 8 Servicing and Maintenance Start up ATTENTION ATTENTION The surface of the motor must be kept free of dirt. Switch off at the mains. The motor shaft is spinning in permanently greased After connection the electrical wires, close the ter- ball bearings (with special grease and increased minal box. -
Page 7: Trouble Shooter's Guide
9 Trouble shooter’s guide Fault Cause Remedy Motor does not start, no motor At least two of the power supply Check fuses, terminals and supply noise leads have failed leads . Overload has tripped Inspect overload Motor does not start, humming noise One of the supply leads has failed See above Impeller faulty... -
Page 8: Spare Part
10 Spare part 10.1 Spare part list for the immersion pumps of the series SGL801 ... 1103 Item Description Stator with terminal board Motor flange End shield Terminal box up to 5.5 kW Terminal box frame up 9.0 kW Terminal box cover up 9.0 kW Fan cover Ball bearing 5.0…5.5 kW DIN 625... -
Page 9: Repair
10.2 Indications to the spare part order 11.2 Assembling the insert shaft and motor shaft Spare parts are available from the supplier. Standard commercially available parts are to be pur- ATTENTION chased in accordance with the model type. The ordering of spare parts should contain the fol- Clean the contact surfaces of the insert shaft (2) lowing details: (inside) and the motor shaft (3). -
Page 10: Ec Declaration Of Conformity
13 EC declaration of conformity DEUTSCH / ENGLISH /FRANÇAIS / ESPAÑOL EG-Konformitätserklärung EC declaration of conformity / Déclaration de conformité CE / Declaración de conformidad CE Hersteller / Manufacturer / Constructeur / Fabricante Brinkmann Pumpen, K. H. Brinkmann GmbH & Co. KG Friedrichstraße 2, D-58791 Werdohl Produktbezeichnung / Product name / Désignation du produit / Designación del producto Tauchpumpen / Immersion pumps / Pompes plongeantes / Bombas de inmersión...
Need help?
Do you have a question about the SGL Series and is the answer not in the manual?
Questions and answers