Table of Contents
Advertisement
Quick Links
BAS6520
BRINKMANN Immersion Pumps
BRINKMANN PUMPS, Inc.
47060 Cartier Drive
Wixom, MI 48393
USA
Phone: +1 248 926 9400
Fax.:
+1 248 926 9405
Subject to change without prior notice.
Brinkmann Pumps, Inc.
Operating Instructions
11/2012
Edition
SFL650...1150
www.brinkmannpumps.com
contact@brinkmannpumps.com
Order - No.: BAS6520 ENGLISH
Page 1 of 10
Advertisement
Table of Contents
Related Manuals for BRINKMANN PUMPS SFL650S
Summary of Contents for BRINKMANN PUMPS SFL650S
- Page 1 BRINKMANN PUMPS, Inc. 47060 Cartier Drive Wixom, MI 48393 Phone: +1 248 926 9400 www.brinkmannpumps.com Fax.: +1 248 926 9405 contact@brinkmannpumps.com Subject to change without prior notice. Order - No.: BAS6520 ENGLISH Brinkmann Pumps, Inc. 11/2012 Page 1 of 10 Edition...
-
Page 2: Table Of Contents
Brinkmann Immersions Pumps of the Series SFL650…1150 Contents Indication to the manual ........2 8 Servicing and Maintenance ....... 6 Description of the Product ......2-3 9 Troubleshooting Guide ........7 Safety instructions ..........4 10 Spare Parts ............. 8-9 Transportation and Storage ....... - Page 3 Technical data Max. del. Max. del. Height Depth of Weight Power pressure volume immersion spec. weight 1 Type l/min Inches mm Inches SFL650S 220 16.5 8.66 12.60 17.72 22.44 30.31 39.37 1000 1000 1100 16.9 9.06 SFL850S 230 12.99 18.11 22.83...
-
Page 4: Safety Instructions
3 Safety instructions Safety instructions relevant for operation When operating the pump, the safety instructions • If hot or cold machine components involve haz- contained in this manual, the relevant national acci- ards, they must be guarded against accidental dent prevention regulations and any other service and contact. -
Page 5: Installation And Connection
5 Installation and Connection Electric wiring Mechanical installation During any assembly or disassembly process the pumps must be secured against tipping trough ropes for example at all times. All service work must be carried out by qualified Pumps must be mounted securely. Piping, tank and service personnel. -
Page 6: Start-Up / Shut-Down
6 Start-up / Shut-down ATTENTION Start-up The SFL pump should be operated in continual ATTENTION operation mode, not pulsed mode! Switch off at the mains. Pulsed mode causes increased wear due to the After connection the electrical wires, close the termi- return flow of chips and additional load on the nal box. -
Page 7: Troubleshooting Guide
9 Troubleshooting Guide Fault Cause Remedy Motor does not start, no motor At least two of the power supply Check fuses, terminals and supply noise leads have failed leads . Overload has tripped Inspect overload Motor does not start, humming noise One of the supply leads has failed See above Impeller faulty... -
Page 8: Spare Parts
10 Spare Parts 10.1 Spare Part List for the Immersion umps of the Series SFL650…1150 Item Description Stator with terminal board Motor flange End shield Terminal box Fan cover Ball bearing up to 3.5 HP (2.6 kW) DIN 628 Ball bearing DIN 625 10 Ball bearing DIN 625... -
Page 9: Repair
10.2 Indications to the spare part order 11.2 Assembling the insert shaft and motor shaft Spare parts are available from the supplier. ATTENTION Standard commercially available parts are to be purchased in accordance with the model type. Clean the contact surfaces of the insert shaft (2) The ordering of spare parts should contain the follow- (inside) and the motor shaft (3). -
Page 10: Warranty
13 WARRANTY Brinkmann Pumps, Inc. warrants that the product contained herein conforms to the descrip- tion in Brinkmann's catalog and that if this product shall fail to conform to the description thereof or to any express or implied warranty, Brinkmann shall, upon written notice of such nonconformity within one year of the date of its shipment from BRINKMANN'S plant, repair or replace such non-conforming material at the original point of delivery.
Need help?
Do you have a question about the SFL650S and is the answer not in the manual?
Questions and answers