Configuration; Cleaning - Burkert 8605 Quick Start Manual

6.3 LED display
During operation of the control electronics in cable plug variant without an
operating unit, the operating state is indicated by 2 LEDs.
LED yellow: Valve switching status
LED NAMUR: Device status according to
NAMUR NE107
Fig. 6: LED display of the control electronics without an operating unit
7

CONFIGURATION

The control electronics are configured with the Bürkert Communicator
software.
The Bürkert Communicator software and the related general
description can be found on the Bürkert homepage.
The exact description of the configuration can be found in
the separate software operating instructions on the Bürkert
homepage www.burkert.com
8

CLEANING

Clean the control electronics Type 8605 with standard cleaning agents.
Do not use any alkaline cleaners, as these will have damaging effects
on the materials used.
english
→ Type 8605.
9