Product Description - Burkert 8605 Quick Start Manual

NOTE
Electrostatic sensitive components / modules.
The device contains electronic components which are sensitive to
electrostatic discharge (ESD). Components which come into contact
with electrostatically charged people or objects are at risk. In the
worst case scenario, they will be destroyed immediately or will fail
after start-up.
▶ Observe the requirements in accordance with EN 61340-5-1 to
minimise or avoid the possibility of damage caused by a sudden
electrostatic discharge.
▶ Do not touch electronic components while the supply voltage is
switched on.
4

PRODUCT DESCRIPTION

4.1 Intended application area
Type 8605 is designed for permanent use in industrial environments, in
particular in the areas of control and regulating technology.
4.2 General description
The digital control electronics Type 8605 for solenoid valves control all
Bürkert valves up to a maximum current of 1000 mA.
The solenoid valve is initially fully controlled (100 % power). After a
specified time, the solenoid valve is moved to its holding power (reduced
power).
Fig. 1: Type 8605, control electronics with connector diagram A
During operation of the control electronics Type 8605 in the cable plug
variant, the operating state is indicated by 2 LEDs.
The following options are available to the user:
• individual adjustment of the colour for the switching state of the
valve,
• standardized Namur display or
• a combination of switching state and Namur display.
english
5