Assembly - Burkert 8605 Quick Start Manual

6

ASSEMBLY

DANGER
Risk of injury due to high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pressure.
Vent or drain the lines.
Risk of injury due to electric shock.
▶ Before working on the device or system, switch off the power supply.
Secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for
electrical equipment.
WARNING
Risk of injury due to improper assembly.
▶ Assembly may be carried out only by trained technicians and with
the appropriate tools.
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.
6.1 Electrical connection
Type 8605 with cable plug is connected to the power via a 4-pole ter-
minal strip in the device.
Cable diameter 6...8 mm
Cable cross-section max. 0.75 mm
Cable connection Plug-in connector M12, 5-pole
Fig. 2: Terminal strip connection
english
CAN_H (digital)
CAN_L (digital)
GND
12...24 V DC
7