Wiring Diagram - Single Door Exit Only - Assa Abloy Corbin Russwin ED4000 Installation Instructions Manual

Delayed Egress
Exit Device
Installation Instructions
10

Wiring Diagram - Single Door Exit Only

Operation:
Mechanical trim can be added for entry. Trim will
not affect alarm if a door position switch is not
being used. Refer to DPS wiring if necessary.
(Figure 9)
Connector
J2
(Device)
Figure 9
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2018, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Wire
Transfer
Hinge
12
120 VAC
Securitron
BPS
Power
Supply
To NC
Fire Alarm
Contacts
FM209 10/18