Assa Abloy Corbin Russwin ED5600 Series Installation Instructions Manual

Installation Instructions
ED5600(A) Series
Mortise Exit Devices
For Metal, Composite, and Wood Doors
Outside Trim: Device is packed ready for any compatible trim.
Mortise Lock
(2) 12-12-24 PUFHM/WS
Universal
Strike
Armored Front
Armored Front Screw
(2) 12-12-24 PUFHM/WS
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information
go to www.P65warnings.ca.gov.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
(2) 1/4-20 x
3/4" PRHMS
(Special Head)
Device Assembly
Cover
(2) 8-32 x 5/164" PUFHMS
Dogging
Feature to hold bolts retracted and touchpad depressed, for push-pull door
operation.
To Dog Device:
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
(Not a feature of fire labeled devices.)
(3) 8-32 x 5/16" PUFHMS
End Clamp
(2) 1/4-10 x 3/4" PRHMS or (2) #14 Wood Screws
Handed Mortise Lock
(See "To change mortise lock hand")
Device is non handed
RHR Door
End Cap
LHR Door
FM168 12/20