Assa Abloy Corbin Russwin ED4800 Series Installation Instructions Manual

Installation Instructions
ED4800 (M) (MA) Series
Shim (2 supplied)
Strike Plate
Strike
(3) 10-24 x 3/4" PFHMS
Top Latch
(2) 10-24 x 1/2" PRHMS
Top Tube
8' (2.44m) Opening
7'6" (2.29m) Opening
7'2" (2.18m) Opening
7' (2.13m) Opening
Top Rod
(2) Arm and Bracket Assembly
(5) Cotter Pin
(2) Yoke Pin
(2) Set Screw
#8-32 UNC
(2) 1/4-20 x 3/4" PRHMS
(Special Head)
Bottom Rod Assembly
Deadbolt
Bottom Bolt Case
(2) 10-24 x 1/2" PFHMS
Strike
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2010, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
(Fire Devices)
(2) E-Rings
(2) #8-32 x 2" PHPMS
Temporary Screws
Cover
2) 8-32 x 5/16" PUFHMS
ED4800M/ED4800MA
Top Latch & Bottom Bolt
Concealed Vertical Rod
End Clamp
(2) 1/4-20 Pan Head Machine Screws
OR (2) #14 Wood Screws
Hole Plug
Dogging:
Feature to hold bolts retracted and touchpad
Dogging
depressed for push-pull door operation.
Key
Note: Dogging is not a feature of fire labeled
devices.
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
Important:
For use with metal doors only.
Device is packed ready for any compatible trim.
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65warnings.ca.gov.
Case
Exit Device
(3) 8-32 Flat Head
Machine Screws
End Cap
(617419150) FM322 01/19