Before First Use; Intended Use; Inserting/Changing The Tools; Operation - Westfalia 843612 Original Instructions Manual

Before first Use

Take the straight grinder out of the packaging. Keep packaging
materials away from children. There is a risk of suffocation!
Check the straight grinder for damage in transit. Do not use the
device if it is damaged.

Intended Use


The straight grinder is designed for grinding and deburring of
different material. When using the correct tool, the machine
can be used as a grinder, carving machine, polisher or
electrical wire brush.
 The intended use also includes an operation following the
operating instructions.

Any further
unauthorised changes (reconstruction, no original tools) can
lead to danger and are meant to be not in accordance with
regulations.
Inserting/Changing the Tools (e. g. Grinding Stone)
Before starting work on the machine, unplug the power cord from
power mains.
1. Use the included wrenches
(6 and 7) and hold the
spindle (3) firmly with the
wrench (see drawing).
2. Loosen the hex collet nut
(2) with the wrench buy
turning counter clockwise.
3. Insert the mandrel (A) of the
tool (e. g. grinding stone) up
to the end into the collet (1).

Operation

use (different media, applying
7
A
6
23
force) or