Paper Feed Problems - Ricoh SP 277 NwX Operating Instructions Manual

Paper Feed Problems

If the machine is operating but paper will not feed or paper jams occur frequently, check the condition of
the machine and paper.
Problem
Paper does not feed smoothly.
Paper jams occur frequently.
Multiple sheets of paper are fed at
one time.
• Use supported types of paper. See page 30 "Supported
Paper".
• Load paper correctly, making sure that the paper guides
are properly adjusted. See page 18 "Loading Paper".
• If the paper is curled, straighten the paper.
• Take out the paper from tray and fan it well. Then,
reverse the top and bottom of the paper, and put it back
in the tray.
• If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
• Avoid printing on both sides of paper when printing
images that contain large solid areas, which consume a
lot of toner.
• Use supported types of paper. See page 30 "Supported
Paper".
• Load paper only as high as the upper limit markings on
the paper guide.
• Fan the paper well before loading. Also make sure that
the edges are even by tapping the stack on a flat surface
such as a desk.
• Make sure that the paper guides are in the right position.
• Use supported types of paper. See page 30 "Supported
Paper".
• Load paper only as high as the upper limit markings on
the paper guide.
• Check that paper was not added while there was still
some left in the tray. Only add paper when there is none
left in the tray.
Paper Feed Problems
Solution
77