Table of Contents
Advertisement
Operation
After the transmitter, all receivers, and their connected devices are powered up, the system
is fully operational. If any problems are encountered, verify that the cables are routed and
connected properly, and that all display devices have identical resolutions and refresh rates.
If your problems persist, call the Extron S3 Sales & Technical Support Hotline (see the
contact numbers
on the last page of this guide for the Extron office nearest you.)
To take advantage of the various adjustments and test patterns available in the
PowerCage FOX, you need to connect a computer or other RS-232 capable device
to the Remote/RS-232 port on the unit that provides the function or to the front panel
Configuration port and operate using either
SIS commands
or the
FOX Extenders
Control Program
on a computer running Windows.
PowerCage FOX HDMI • Installation and Basic Operation
16
Advertisement
Table of Contents
