Furuno NAVnet TZtouch3 Series Installation Checklist page 9
Hide thumbs
Also See for NAVnet TZtouch3 Series:
- Operator's manual (393 pages) ,
- Setup manual (12 pages) ,
- Manual (3 pages)
Advertisement
DFF3 DIP Switch Settings
Connection to NavNet 3D,TZtouch,TZtouch2 and TZtouch3
The DFF3 Dip Switch setting on S2 is defaulted to work with NavNet3D (MFD8, MFD12 or
MFDBB) network. When connecting the DFF3 to a TZtouch network you will need to change
the default position of the Dip Switches.
If the DFF3 was installed in a NavNet 3D MFD (MFD8, MFD12 or MFDBB) network, the Dip
Switches must be changed to the position shown below.
Advertisement
