Furuno NAVnet TZtouch3 Series Installation Checklist page 8
Hide thumbs
Also See for NAVnet TZtouch3 Series:
- Operator's manual (393 pages) ,
- Setup manual (12 pages) ,
- Manual (3 pages)
Advertisement
DFF1/BBDS1 Mode Switch Settings
Connection to NavNet 3D,TZtouch,TZtouch2 and TZtouch3
DFF1/BBDS1 Mode Switches are defaulted to work with NavNet 3D MFD (MFD8, MFD12 or
MFDBB) network. When connecting the DFF1/BBDS1 to a TZtouch network you will need to
change the default position of the MODE Switches.
If the DFF1/BBDS1 was installed in a NavNet 3D MFD (MFD8, MFD12 or MFDBB) network, the
Mode Switches must be changed to the position shown below.
Advertisement
