Installation Kit - Siemens VersiCharge AC Quick Start Installation Manual

Installation kit

If hardwired or 2-pole, 50 amp Circuit Breaker if using a 240 V outlet.
Equipment List
Standard Installation – What you will need:
Cordless Drill (Phillips Bit with extender)
NEMA 6-50 Outlet (Note: if hardwired
an outlet is not needed.)
Tamper resistant 5/32" Hex Bit with
¼" Hex Shank (secure the charger)
Stud Finder
7/16" Socket wrench
#6 75C copper wire should be used for
60A charger and #8 75C copper wire
should be used for a 50A charger.
NOTE: 1. Wire must have a temperature
rating of 75C or higher). 2. Do not set
the amp switch higher than 40A unless
hardwired to a dedicated 60A branch
protection circuit breaker.
Quick start installation guide | VersiCharge™ AC
Certified Electrician (Recommended)
240 V AC Voltmeter
Screwdriver
2-pole, 60 amp Circuit Breaker if
hardwired or using a 2-pole, 50A circuit
breaker using a 240 V outlet.
3