Siemens VersiCharge AC Quick Start Installation Manual page 4

VersiCharge™ AC | Quick start installation guide
Kit Supplied Equipment
1 – Mounting Bracket
2 – Lag Screws, Hex Head
screws, 1/4 x 2" (for
securing the mounting
bracket to the wall studs)
2.3 Alternate Installation – What you will need
(screws and anchors are not included in the VersiCharge installation kit):
4 – #12 x 1-½ LG Phillips head Ø.375 head minimum, with 4 - #10 – 14 wall anchors (NOTE: wall anchors must be rated for
25 lbs. or more so that the 4 anchors used for installation are rated for 100 lbs in total.)
4
1 – Cable Holster
3 – #10-32 X 3/8" Phillips
Drive, Pan Head Stainless
Steel Screws, (for securing
the holster, mounting
bracket, and cover)
1 – ModBus Connector
Admin Card
Admin Card
2 – Admin Cards
1 – #8 x 2-1/2" Flat Head
Drywall Screw (for securing
the holster to the wall stud)
User Card
User Card
User Card
User Card
User Card
5 – User cards
3 – #10-32 X 3/8", Tamper
Resistant, Pin-In Hex Socket
Button Head Cap Screw
(secure the charger)