Software Re-Amping - Antelope Zen Tour Synergy Core User Manual

Notes:
Level faders for the REAMP outputs are available in the Control Panel application's 'Settings
●
Window' (the 'Gear' symbol). Attenuate the signal if you are overdriving the amplifier's front
end.
It's possible to use the REAMP outputs as Sends for external equipment, but we cannot
●
recommend this unless said equipment has preamps to amplify the very quiet instrument-
level signal. You are better off using the insert patch points on the Zen Tour Synergy Core's
rear panel for Send/Return configurations.

Software re-amping

You can re-amp DI guitar tracks through the Synergy Core amps & cabs as well:
1. Open your DAW. Place your DI on a track and assign it to one of Outputs 1 – 32 (Thunderbolt™) or
Outputs 1 – 24 (USB). Remember: DAW Outputs = 'COMP PLAY' inputs.
2. Open the Control Panel. Enter the 'Routing' tab and drag the 'COMP PLAY' block onto an 'AFX IN'
block.
3. Enter the 'Effects' tab and click the channel you want to work on.
4. Stack your amps, cabs and FX by clicking the 'ADD NEW EFFECT' button.
5. Hit 'Play' in your DAW's transport controls to hear the sound as you shape your tone.
6. If you want to record the result, route the corresponding 'AFX OUT' block onto an available 'COMP
REC' output and record from it in your DAW.
Zen Tour Synergy Core User Manual 51