Configuring For Macos 10.14 Mojave (Or Later) - Antelope Zen Tour Synergy Core User Manual

4. Enter the 'Enhancements' tab and disable all enhancements.
5. Enter the 'Advanced' tab and choose any of the available "2 channel, 24-bit" modes from the
drop-down menu. Click 'OK' to close the window.
6. Back in Sound settings, click 'Device Properties' under 'Input'. Then, click 'Additional Device
Properties'. Enter the 'Enhancements' tab and disable all enhancements. Click 'OK' to close the
window.
Tips
If you are experiencing interruptions or failure when using your DAW and trying to playback
●
audio from your OS at the same time, make sure that the device sample rate matches the
one of your DAW session.
In some cases, disabling the 'Exclusive mode' functionality from the 'Advanced' tabs might
●
help when running multiple playback applications at the same time.
Disabling the 32kHz sample rate isn't mandatory, but it might help in general.
●
Further Reading
● Antelope Audio Knowledge Base

Configuring for macOS 10.14 Mojave (or later)

The new security settings introduced in macOS 10.14 Mojave and later releases may result in no
input signal reaching your DAW, despite having everything set up correctly.
Zen Tour Synergy Core User Manual
-
Windows 10 Optimization
8