Auto Tuning System - Sharp DV-NC85 Operation Manual

Auto Tuning System

This Product is equipped with an Auto Tuning System to provide
easier set up of the Product. After following the instructions for Basic
Connection on pages 14 and 15 and Adjusting the Video Channel
on page 19, turn on your TV, press OPERATE to turn on the Product,
and select the video channel. The Product will automatically display
the setting screens as shown below.
LANGUAGE
setting screen
Press SET. (Manual operation)
SYSTEM
setting screen
Press SET. (Manual operation)
AUTOMATIC TUNING
Press VCR MENU to cancel the next step.
CLOCK
setting screen
Press SET. (Manual operation)
Normal screen appears.
• If the Language selection and Auto Tuning have already been
performed, the Clock setting screen will first appear. To reset all VCR
settings and perform the Auto Tuning from the Language setting
screen, see page 37. (Perform "VCR-RESET")
DVNC85(E)#014_022.p65
Selection of language to be used for
the On Screen Display. (See page 37.)
Selection of broadcast system(SYSTEM)
(I, B/G, D/K or M) that correspond with your
area. (See page 28, step 3.)
Setting and sorting the channels for your
screen
area. (See page 28.)
Setting the present time. (See page 35.)
21
Hong Kong model
Southeast Asia model
Australia model
TIMER
OPERATE
EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN
ENTER
ZERO BACK
SKIP SEARCH
KARAOKE
SELECT
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
03.6.24, 9:50 AM
G-CODE
PROG
21
GB