8
OFFSET/GAIN SETTING
When using the user range setting, configure the offset/gain setting.
Access to the offset/gain setting window in the engineering tool to set the offset/gain setting.
8.1
Setting Procedure
This section describes the setting procedure for the offset/gain setting of the D/A converter module. In wave output mode, the
offset/gain setting cannot be accessed. Change the mode to the normal output mode or the offset/gain setting mode in
advance.
Do not turn off the external power supply in the middle of the offset/gain setting. Otherwise, the offset/gain setting is not
properly applied.
[Tool] [Module Tool List]
1.
Select "Analog Output" "Offset/gain setting" and click
the [OK] button.
2.
Select the target module for the offset/gain setting, and
click [OK] button.
3.
Click the [Yes] button.
8 OFFSET/GAIN SETTING
8.1 Setting Procedure
8
51