Mitsubishi Electric MELSEC iQ-R60DA4 Startup User's Manual page 48

Label setting
The following table lists the module labels and global labels used in the program example in this section.
The module label setting does not need to be changed here. For details on global labels, refer to the following.
 MELSEC iQ-R Programming Manual (Program Design)
Classification Label name
Module label R60DA_1.bModuleREADY
R60DA_1.bExternalPowerSupplyREADY_Flag
R60DA_1.bOperatingConditionSettingCompletedFlag
R60DA_1.bCH1OutputEnableDisableFlag
R60DA_1.bOperatingConditionSettingRequest
R60DA_1.stnControl_D[0].uWaveOutputStartStopRequest_D
R60DA_1.stnSetting_D[0].uD_A_conversionEnableDisableSetting
_D
R60DA_1
Labels to be Define global labels as shown below:
defined
7 OPERATION EXAMPLE
46
7.3 Program Example (Wave Output Mode)
Description
Module READY
External power supply READY flag
Operating condition setting completed flag
CH1 Output enable/disable flag
Operating condition setting request
CH1 Wave output start/stop request
CH1 D/A conversion enable/disable
setting
Target module
Device
X0
X7
X9
Y1
Y9
U0\G462
U0\G500
