Mitsubishi Electric MELSEC iQ-R60DA4 Startup User's Manual page 52

■Wave output start processing program example
The following figure shows an example of a program that starts the wave output of CH1.
(1326) Turns on CH1 Output enable/disable flag.
(1343) Turns on Wave data output start/stop request and sets Wave output start/stop request to Wave output start request (1).
(1347) To stop the wave output, turn off Wave data output start/stop request and set Wave output start/stop request to Wave output stop request (0).
(1351) Turns on Wave output start/stop request FB start flag to start or stop the wave output.
7 OPERATION EXAMPLE
50
7.3 Program Example (Wave Output Mode)