Mitsubishi Electric MELSEC iQ-R60DA4 Startup User's Manual page 34

Operating procedure
1.
Set the window as follows to create the project.
[Project]  [New]
2.
Click the [Setting Change] button and set the module to use the module label.
3.
Click the [OK] button in the following window to add the module label of the CPU module.
4.
Add the D/A converter module with the window set as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
7 OPERATION EXAMPLE
32
7.2 Program Example (Normal Output Mode)