Page 1
Quick Installation Guide ITP-500(-E) ITP-800(-E) IP56, 5 x 10/100Base M12 (Hardened) IP56, 8 x 10/100Base M12 (Hardened) sales@ctcu.com...
Page 2
8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com H www.ctcu.com 2020 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
Page 3
CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.
M12 connectors to ensure tight and robust connections and guarantee reliable operation against environmental disturbances such as vibration and shock. The ITP-500(-E) & ITP-800(-E) series Ethernet switches comply with EN 50155 standard that covers strict demands on operating temperature, power input voltage, surge, ESD, vibration, and shock, thus making these switches suitable for industrial applications such as vehicle, rolling stock and railway.
Housing: IP56 Waterproof Protection Fanless Design Dimensions: ITP-500(-E): 43 mm (D) x 30 mm (W) x 206.5 mm (H) ITP-800(-E): 39 mm (D) x 65.1 mm (W) x 191.5 mm (H) Installation Method: Wall mounting...
Panels Figure 4: Figure 3: Figure 2: ITP-800 Figure 1: ITP-500 ITP-800 ITP-500 Front Panel Front Panel Side Panel Side Panel Index No. Description Wall mounting holes Grounding Power port label Power input port Power LED M12 Ethernet ports Ethernet port LED...
Orange / White Orange Table 2: Ethernet Port PIN Assignment M12 Power Input Cable Model: CAB-M12AF5-OPEN Female M12 Connector Figure 6. M12 A-code Female Cable Pins Color ITP-500(-E) ITP-800(-E) Power Supply Power Supply 1 Black Positive Positive Power Supply 2 Blue N.C.
M12 Cable Connector Installation Before assembling M12 open cable, make sure you have the following M12 cable connector components and open cable at hand. Male Contact Screw Nut Housing O-Ring Connector Assembly Steps: Step 1. Insert the screw nut, O-ring, and housing into the cable in the order shown in Figure 2 and keep them loose in this step.
Page 11
Step 3. Tighten the connector in clockwise direction, making sure that the wires inside the connector are not twisted as the screwed housing is assembled. Figure 9. Tighten the Connector...
Bypass Relay Function for ITP-800(-E) ITP-800(-E) provides two copper interfaces with auto bypass relay function in the event of sudden power loss particularly in daisy chain or linear topology. When power failure occurs in one of the switches, bypass relay function can activate bypassing mechanism by interconnecting internal circuits automatically to ensure that links between switches operate uninterruptedly and continuously.
Earth Ground Connection An earth ground hole (same as wall mounting hole on the top) is provided on the wall mounting metal plate (See Figure 1 & 2) with an earth ground sign next to it. Grounding the device can help to release leakage of electricity to the earth safely so as to reduce injuries from electromagnetic interference (EMI).
Wall-Mounting Installation The Ethernet Switch can be mounted on the wall using the attached wall-mounting bracket with two wall-mounting holes. The installation is simple and easy and only requires to prepare two appropriate wall screws for mounting the Ethernet Switch. After you find a suitable place to wall-mount the Ethernet Switch, remember to align the mounting holes (marked X in Figure 11) with wall screws.