Using The Command-Line Interface; Figure 11 Check Point Network Voyager Reference Access Points - Nokia Check Point IP150 Installation Manual

4
Check Point IPSO documentation at the Check Point Support Center at
support.checkpoint.com/.
Check Point Network Voyager online help—You can access online help when you use
Check Point Network Voyager
for
click Help. A Close button is available at the bottom of each online help window you view.

Figure 11 Check Point Network Voyager Reference Access Points

Using the Command-Line Interface

You can also use the Check Point IPSO command-line interface (CLI) to manage and configure
Check Point IP security appliances from the command line. Nearly everything that you can
accomplish with Check Point Network Voyager you can also do with the CLI.
To access the command-line interface
1. Log on to the appliance by using a command-line connection (SSH, console, or Telnet) over
a TCP/IP network as an admin, cadmin, or monitor user:
30
Check Point Network Voyager
Link to complete user
documentation
Link to inline help (context sensitive help)
If you log in as a cadmin (cluster administrator) user, you can change and view
configuration settings on all the cluster nodes. For information about how to administer a
cluster, see the traffic management commands section in the CLI Reference Guide for the
version of Check Point IPSO you are using.
. Online help is the context-sensitive information source
. To access online help for the window you are viewing,
Check Point IP150 Security Platform Installation Guide
http://