Replacing Or Upgrading Memory; Figure 13 Dimm Socket Locations - Nokia Check Point IP150 Installation Manual

5

Replacing or Upgrading Memory

The IP150 appliances have two dual inline memory-module (DIMM) sockets. This section
explains how to upgrade or replace the memory in your appliance by using a Check
Point-approved memory upgrade kit.
The IP150 comes with different memory configurations. Contact Check Point customer support
for more information on the supported memory configurations.
Note
Check Point recommends that you obtain memory kits only from Check Point or authorized
resellers. For sales or reseller information, see the Check Point Web site at
www.checkpoint.com.
The DIMM sockets are located at the right of the motherboard, as you look at the appliance from
the front, as

Figure 13 DIMM Socket Locations

42
Figure 13 shows.
DIMMs and
DIMM sockets
Note: Shown here with bottom cover
already removed.
Check Point IP150 Security Platform Installation Guide
00677