Replacing A Hard-Disk Drive - Nokia Check Point IP150 Installation Manual

6. Gently insert the new compact flash ensuring that it is fully seated. Avoid pressing down on
the surface of the card as much as possible.
7. Replace the bottom cover, reinstall the appliance in the rack, and reconnect the appliance
power cord.
8. Turn on the power supply at the back of the appliance.

Replacing a Hard-Disk Drive

You can replace the hard-disk drive to your IP150 appliance. The following figure shows the
location of the hard-disk drive on the motherboard.
Check Point IP150 Security Platform Installation Guide
Replacing a Hard-Disk Drive
00679
37