Check Overload Records - KERN HFD Service Manual

F6 ti
F7 ti
F8 st
F9 of
F10 ovEr

8.3 Check overload records


Call up function „F10 ovEr", see chapter Fehler! Verweisquelle konnte nicht gefunden werden.
in the HFD user manual

Press the ZERO key to confirm, the display will show the overload number

Press ZERO key again, the date / time and the overload weight will be show in turn.

Using the TARE-key to select the overload number one by one, and press ZERO key to
check the overload information you select.
21
blue
off
600
1200
baud 2400
4800
9600
00:00 Setting time
00.00.00 Setting date
on Multitare switched on
off Multitare switched off
0 Automatic switch-off function is disabled
5 min Weighing system will be turned off after 3 min.
10 min Weighing system will be turned off after 5 min.
20 min Weighing system will be turned off after 15 min.
30 min Weighing system will be turned off after 30 min.
Check overload records, see chapter 8.3 in the HFD
XXXXXXX
user manual
Not documented
Interfaces switched-off
Baud rate
HFD-SH-e-1810