3.8 Testing upon acceptance
When receiving the appliance, please check packaging immediately, and the appliance itself when
unpacking for possible visible damage.
3.9 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have reached the
operating temperature (see warming up time chap. 1 see the HFD User manual).
During this warming up time the balance must be connected to the power supply (mains,
accumulator or battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
For checking original dimensions, s. chap. 6.2 in the HFD user manual
3.10 Shutdown and storage
Take off the crane scales from the crane and dismantle all load attachment devices from the
crane scales.
Do not store the crane scales at open air
7
HFD-SH-e-1810