Engine Removal - Honda BF2D Series Manual

6. ENGINE REMOVAUINSTALLATION
H:OND.A
BPeD
I
1. ENGINE REMOVAL
1. ENGINE REMOVAL
1) Remove the engine cover (P. 4-1), and remove the fol-
lowing parts.
- Fuel tank (P. 4-2)
- Recoil starter (P. 5-1)
- Fan cover (P. 5-1)
2) Push in the choke knob and disconnect the choke rod.
3) Disconnect the choke rod and throttle wire from the car-
buretor.
4) Remove the 5 x 16 mm flange bolts. Disconnect the
exhaust pipe from the engine and remove the air guide
plate.
5) Remove the 5 x 10 mm flange bolt and disconnect the
engine switch ground terminal.
6) Remove the 6 x 60 flange bolts and washers and remove
the engine.
2. ENGINE INSTALLATION
[1]
ENGINE
SWITCH
WIRE
[2J
CHOKE ROD
[2] AIR GUIDE PLATE
6-1
Page: 35 - Honda BF2D Outboard Motors Shop Manual - http://www.ReadManuals.Com