Honda BF2D Series Manual page 34

6) Install the ratchet in the position shown.
7) Set the friction spring ring and set screw in the ratchet
guide. Holding the ratchet guide, tighten the set screw
securely.
8) Pull the starter rope several times and check whether the
ratchet moves smoothly.
[1]
~
SET SCREW----- ..
[4]
FRICTION
SPRING
RING
H:ON'D.A
BFSD
5-4
Page: 34 - Honda BF2D Outboard Motors Shop Manual - http://www.ReadManuals.Com