Cylinder Head Cover Installation - Honda BF2D Series Manual

HONDA
BF2D
CYLINDER HEAD COVER INSTALLATION
I)
Clean the mating surfaces of the valve cover and the
cylinder block with a degreasing cleaning agent or a clean
shop towel.
2) Apply the liquid sealant (Three Bond 1207B or equivalent)
to the position shown on the cylinder block.
Assemble the valve cover within 3 minutes after applica-
tion of the liquid packing.
3) Wait for 20 minutes after assembly. Do not add oil or
start the engine during this period.
111
Liquid sealant application position
Apply a bead about 1.0 rnm (0.04 in) in diameter.
\
10-2
Page: 46 - Honda BF2D Outboard Motors Shop Manual -
http:llwww.ReadManuals.Com