AJAX DoorProtect Plus User Manual page 9

Setting
First field
Room
Delay when entering, s
Delay when leaving, s
Delays in Night mode
Arm in Night mode
Primary Detector
External contact enabled
Shock sensor
Value
Detector name, can be edited
Selecting the virtual room to which the device is
assigned
Selecting delay time when entering. Delay when
entering (alarm activation delay) is the time you
have to disarm the security system after entering
the room
What is delay when entering
Selecting the delay time when exiting. Delay when
exiting (alarm activation delay) is the time you
have to exit the room after arming the security
system
What is delay when leaving
Delay turned on when using Night mode
What is night mode
If actived, the detector switches to armed state
while Night mode is active.
Night mode
Kept in mind that in
sensor of the detector become armed. It is not
possible to arm only certain sensors of the
detector in Night mode (for example, only a tilt
sensor)
If setting is active, the DoorProtect Plus primary
detector reacts to opening/closing
If setting is active, the detector registers external
detector alarms
If active, shock-sensor will detect alarm after
more than one impact
, all active