Performance Testing; Installing The Detector - AJAX DoorProtect Plus User Manual
Hide thumbs
Also See for DoorProtect Plus:
- User manual (20 pages) ,
- Quick start manual (5 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Indication
Event
Switching on the detector
Detector connection to the
Alarm / tamper activation
Battery needs replacing
Performance testing
The Ajax security system allows conducting tests for checking the functionality of
connected devices.
The tests do not start immediately but within 36 seconds by default. The starting
time depends on the ping interval (the paragraph on "Jeweller" settings in hub
settings).
Jeweller Signal Strength Test
Detection Area Test
Attenuation Test
Installing the Detector
The location of DoorProtect Plus depends on its remoteness from the hub, and
obstacles hindering the radio signal transmission: walls, floors, large objects inside
the room.
Indication
Lights up green for about one
second
Lights up continuously for a few
hub
seconds
Lights up green for about one
second
During the alarm, it slowly lights
up green and slowly goes out
Note
Alarm is sent once in 5 seconds
Replacement of the detector
battery is described in the
Battery Replacement
manual
Advertisement
Table of Contents
Need help?
Do you have a question about the DoorProtect Plus and is the answer not in the manual?
Questions and answers