AJAX DoorProtect Plus User Manual page 7

Lid
Delay when entering, s
Delay when leaving, s
Routed Through ReX
Primary Detector
Secondary detector
Always active
Shock sensor
Tilt sensor
Firmware
Device ID
Settings
1. Devices
2. DoorProtect Plus
3. Settings
The tamper mode of the detector, which reacts to
the detachment of or damage of the body
Entry delay (alarm activation delay) is the time
you have to disarm the security system after
entering the room
What is delay when entering
Delay time when exiting. Delay when exiting
(alarm activation delay) is the time you have to
exit the room after arming the security system
What is delay when leaving
Displays the status of using the radio signal range
extender ReX
Indicates whether the opening sensor is active
Status of the external detector connected to
DoorProtect Plus
Indicates whether the detector is always armed
Indicates whether the shock sensor is active
Indicates whether the tilt sensor is active
The detector firmware version
Device identifier