Function "Application Par." (0A8) - Endress+Hauser Levelflex M FMP40 Function Manual

11 Function group "diagnostics" (0A)
⇒
ENDRESS + HAUSER
– + E
⇒
ENDRESS + HAUSER
– +
E
68
11.9

Function "application par." (0A8)

Displays whether or not one of the settings dependent on the "tank shape" (002),
"medium property" (003) and "process cond." (004) application parameters has been changed
or not.
If, for example, the "output damping" (058) is changed, the
"application par." shows "modified".
Selection:
• not modified
• modified
⇓
After 3 s, the following message appears
Levelflex M
Endress+Hauser