Commissioning - Endress+Hauser Levelflex M FMP40 Function Manual

Levelflex M
⇒
ENDRESS + HAUSER
– + E
Endress+Hauser
1.6

Commissioning

1.6.1 Switching on the measuring device
When the instrument is switched on for the first time, the following messages appear on the display:
⇓
⇓
⇓
⇓
⇓
⇓
After 5 s, the following message appears
Nach 5 s erscheint (z.B. bei HART Geräten)
After 5 s or after you have pressed
sage appears
Select the language
(this message appears the first time the instrument is
switched on)
Select the basic unit
(this message appears the first time the instrument is
switched on)
⇒
The current measured value is displayed
F
After is pressed, you reach the group selection.
This selection enables you to perform the basic setup
1 Notes on use
F
the following mes-
11