Function "No. Of Preambels" (061), Hart Only; Function "Ident Number" (061), Profibus Pa Only - Endress+Hauser Levelflex M FMP40 Function Manual

Levelflex M
⇒
ENDRESS + HAUSER
– + E
"
⇒
ENDRESS + HAUSER
– +
E
"
Endress+Hauser
8 Function group "output" (06), - "PROFIBUS param." (06), PROFIBUS PA only
8.3

Function "no. of preambels" (061), HART only

Enter the number of preambles for the HART protocol with this function.
An increase in the value is advisable for "bad" lines with communications problems.
Caution!
This user input is available for HART devices only!
8.4

Function "ident number" (061), PROFIBUS PA only

• manufacturer
• profile
manufacturer
Set to1522 hex according to manufacturer (PNO registered).
profile
Setting defined as in PA Profile 3.0: 9700 hex - instrument with one AI block.
Caution!
This function is available for PROFIBUS PA devices only!
49