visual engineering H.264 User Manual page 22

Visual Engineering
HD IP Camera
Connecting a WiFi Device
To connect a WiFi enabled device it is first
necessary to search for the HD IP camera's
WiFi signal.
Select the VE_WIFI_CAM signal as shown on the
right.
If prompted for a network key enter the
Network Key as defined in the AP Mode
Security section, the default is:
12345678
Open a WiFi Video Stream
It is necessary to have a video player application
installed on the WiFi enabled device. In the example
shown on the right VLC media player has been
installed.
Use the Server IP address of the WiFi Adaptor and
open an SDP media stream.
• Type the stream details into the box at the top
rtsp://192.168.15.1/h264.sdp
• Select the stream here
• Select the video panel for full screen viewing
visualengineering.co.uk
Video solutions. Integrated
August 2020
Page 22