Pc Connection; Camera Login; Default Ip Address - visual engineering H.264 User Manual

Visual Engineering
Video solutions. Integrated
HD IP Camera August 2020

PC Connection

Once the camera is powered it is possible to view the camera's video and configure the encoder's
parameters over an IP connection to a PC.
The web browser control of the camera's encoder allows the configuration of parameters such as
resolution, bit rate, and network settings, once saved all configuration changes will be retained.
Browse to the camera's web page by typing the camera's IP address into the web browser address
bar.

Camera Login

On trying to establish a connection the user will be prompted for the User Name and Password,
enter the following details:
Default User Name is:
root
Default Password is:
1234

Default IP Address

HD IP cameras are by default set with a fixed IP address of 192.168.1.195, this is detailed on the
camera's part number label.
If the camera is not responding on this address it is possible that the IP address has been changed.
If the new IP address is unknown, the user can use the VE Camera Viewer software application to
locate the IP address. This method is explained in the VE Camera Viewer section.
visualengineering.co.uk Page 11