Wifi Menu - visual engineering H.264 User Manual

Visual Engineering
HD IP Camera

WiFi Menu

For WiFi capability to be available the HD IP Camera
must have the WiFi option included.
The WiFi module requires the WiFi antenna to be
connected to the SMA connector on the top of the
HD IP Camera as shown on the right.
AP Mode Menu
The HD IP camera has an integrated WiFi Adaptor which supports its own WiFi access point. Using
any WiFi enabled device it is possible to connect to the HD IP camera in order to monitor its video
and audio.
The WiFi user configurable settings can be found in the WiFi Setup menu. The AP Mode WiFi menu
allows the user to configure the WiFi access point settings, this is shown in the web page below
along with a short description of the key parameters.
visualengineering.co.uk
Video solutions. Integrated
• Enable or disable the WiFi Access Point
• The camera's WiFi Access Point name
• WiFi channel, select one of 13 channels
• Max number of stations (devices) allowed on the network
• Encryption standard, choose either open or WPA2-PSK
• User configurable network password
• User configurable IP address of the WiFi access point:
To connect to the camera via WiFi the "Server IP"
should be used in the client browser to view the video
August 2020
Page 21